Limepaint
Lime paint
Mineral lime paint for interior and external coatings, with a fine, matt finish, developed for continuous surfaces in which colour retains a mineral expression.
Fine and matt
Limepaint is the finest, most uniform Limecoat expression. Formulated with air lime CL90, inert fillers and mineral pigments, it retains the character of lime with a restrained material presence and a surface defined mainly by colour.
Fine · Matt · Seamless · Mineral
One colour, different expressions of lime
Colour and material
Limepaint’s fine surface gives colour greater presence while retaining the matt appearance characteristic of lime.
Where to use it.
Suitability by application and substrate. Any conditions are stated.
Gypsum plasterSuitable with conditions
Apply directly to continuous gypsum plaster that is sound, clean, dry and uniformly absorbent. Where repairs or differences in absorbency exist, apply Limeprimer first to even out the substrate.
PlasterboardSuitable with preparation
Apply Limeprimer across the full surface before the Limecoat finish to even out absorbency between boards, joints and filled areas.
Lime renderSuitable
Apply directly to lime render that is sound, clean, dry and uniformly absorbent. Where repairs or significant differences in absorbency exist, apply Limeprimer first.
Cement renderSuitable
Apply directly to cement render that is sound, clean, dry and correctly cured. If the substrate has uneven absorbency, apply Limeprimer first.
ConcreteSuitable with conditions
Apply directly to absorbent concrete that is sound, clean and free from release agents or other contaminants. For very dense surfaces or adhesion concerns, confirm the appropriate treatment first.
Existing paintSuitable with conditions
May be applied over existing paint where it is sound, well adhered, clean and compatible with the system. Damaged areas, repairs, uneven absorbency or uncertain substrates require prior preparation or consultation.
A seamless surface
The application sequence creates a uniform surface, evening out substrate absorbency where required.
How to apply →Technical data.
Identification
Application
Performance
Pack sizes
Define the product, application and substrate to find the recommended system and the quantity of material required.
Calculate material →Specification information
Select the colour, application, substrate and its condition to obtain the recommended system and the corresponding specification clause.
The substrate must be sound, clean, dry and correctly prepared. For damaged or contaminated substrates, or where adhesion is uncertain, enquire before specifying.
Seamless mineral coating: Formma Limecoat Limepaint, colour Arena 30. Air lime CL90 paint with inert fillers and mineral pigments. Applied to an interior vertical surface to plasterboard, after applying Limeprimer across the full surface. Apply Limeprimer to the full surface first. Two coats applied by brush, flat brush or roller, 6 h between coats. Fine matt finish. Approximate consumption 0.33 L/m² over two coats. Includes substrate preparation and ancillary works.
Limepaint in architecture
