Limedolomite
Lime paint with aggregate
Mineral lime paint with aggregate, matt and textured in appearance, breathable and with a strong mineral presence, for interior and external surfaces.
Greater body. Stronger mineral presence.
Limedolomite is formulated with air lime CL90, mineral fillers and pigments, selected additives and water. Its higher mineral content gives body and a more material reading than Limepaint, while retaining the breathability characteristic of lime.
Matt · Mineral · Textured · Breathable
One colour, different expressions of lime
Colour over material.
The aggregate changes how light and colour are perceived across the surface.
Where to use it.
Suitability by application and substrate. Any conditions are stated.
Gypsum plasterSuitable with conditions
Apply directly to continuous gypsum plaster that is sound, clean, dry and uniformly absorbent. Where repairs or differences in absorbency exist, apply Limeprimer first to even out the substrate.
PlasterboardSuitable with preparation
Apply Limeprimer across the full surface before the Limecoat finish to even out absorbency between boards, joints and filled areas.
Lime renderSuitable
Apply directly to lime render that is sound, clean, dry and uniformly absorbent. Where repairs or significant differences in absorbency exist, apply Limeprimer first.
Cement renderSuitable
Apply directly to cement render that is sound, clean, dry and correctly cured. If the substrate has uneven absorbency, apply Limeprimer first.
ConcreteSuitable with conditions
Apply directly to absorbent concrete that is sound, clean and free from release agents or other contaminants. For very dense surfaces or adhesion concerns, confirm the appropriate treatment first.
Existing paintSuitable with conditions
May be applied over existing paint where it is sound, well adhered, clean and compatible with the system. Damaged areas, repairs, uneven absorbency or uncertain substrates require prior preparation or consultation.
Material and application
Application controls the movement of the aggregate and the degree of surface uniformity.
How to apply →Technical data.
Identification
Application
Performance
Pack sizes
Define the product, application and substrate to find the recommended system and the quantity of material required.
Calculate material →Specification information
Select the colour, application, substrate and its condition to obtain the recommended system and the corresponding specification clause.
The substrate must be sound, clean, dry and correctly prepared. For damaged or contaminated substrates, or where adhesion is uncertain, enquire before specifying.
Seamless mineral coating: Formma Limecoat Limedolomite, colour Arena 30. Air lime CL90 paste with marble aggregate and mineral pigments. Applied to an interior vertical surface to plasterboard, after applying Limeprimer across the full surface. Apply Limeprimer to the full surface first. Two coats applied by brush, flat brush or roller, 6 h between coats. Matt finish with perceptible aggregate. Approximate consumption 0.40 L/m² over two coats. Includes substrate preparation and ancillary works.
Limedolomite in architecture
